Resumes Two
Tarek Abd Elsadek Ahmad Hammad
E-Mail Address : tarekhammad10@yahoo.com
TEL. # :( 002033588735- 0020 1008255574)
Position : Power Mechanic
Career Summary
§ 14 Years Experience In The Drilling Industry With Santa Fe / Globalsantafe / Transocean Drilling Company In Egypt Zone ,Saudi Arabia ,Qatar, And Middle East Including Major Projects / Shipyards / Upgrades Covered Various Positions From Entry Level ToAsst. Driller on jack up rigs.I have a good cyber experience( 2 years ).Worked on top drive( varco tds3,4,8)Canrig.Drawworks national and TTS Ultra hoist 750-3000. TTS Sense cathead.Worked on DCR equiped with HVAC and multi purpose control module X-COM
§ Septemper 1998 – April 2000 stareted as roustabout on land rig with santa fe egypt.
§ April 2000 – september 2003 worked as floor man in saudi arabia on jack up rig with santa fe.
§ September 2003 – may 2004 Worked as derrick man in saudi arabia on the same rig but the company became global santa fe.
§ May 2004 moved to qatar with global santa fe on the same rig as derrick man.
§ June 2006 worked as assistant driller with global santa fe in qatar on same rig. 2008 the company became transocean
§ October 2009 –september 2010 worked in tunisia as A/D with transocean.
§ October 2010 – Now worked as Asst. Driller with egyptian drilling company on cyber rig
§ From 2000 to 2009 worked on one rig.
Safety And Management Training Courses
§ Driller vocational Training.
§ Drilling practices course.
§ Advanced Safety Auditing ( ASA ) .
§ Well Control (Fundmental , Drillng ) on 25, june, 2006
§ Well Control (Supervisor , Drilling ) on 22 , may. 2008
§ Well Control (Supervisor , Drilling ) on 22 , may. 2010
§ International Safety Management ( ISM ) .
§ Safety Management Leadership .
§ Rig Management System I .
§ Rig Management System II .
§ Rig Management System Awareness .
§ Inviromental Awareness Training .
§ Fall Protection Awareness .
§ Respirator Protection Training .
§ Substance Abuse Supervisors Awareness Training .
§ Confined Space Entry Training .
§ Permit To Work Training .
§ Offshore Survival Training .
§ Asbestos Awareness Training .
§ Job Risk Assessment ( JRA ) .
§ Huet And Sea Survival .
§ BOSIET( 6,DEC,2009).
§ Rescue at Heights Training(using Sala Equipment).
§ Confined Space Entry & Rescue Training.
§ Donut Emergency Escape Training.
§ TTS X-COM ( joystick control system) in sengapore .
§ Weatherford iron roughneck ( joystick control) in sengapore .
§ Stuck pipe prevention.
Selim Ahmed Selim Ahmed
Tel No : mob 002-0116383539-00201090599198
E-mail : free_selim@yahoo.com
Position : Driller
Language skills: good at English
Experience:
Seq
Company
position
From
to
1-
2-
3-
4-
5-
6-
7-
Santa Fe International co.
Arabian Drilling co.
Santa Fe International co.
National Drilling co. Abu Dhabi
National Drilling co. Abu Dhabi
Kuwait drilling co.
IDC-Iraq
Floor man
Derrick man
Derrick man
Assist Driller
Driller
Driller
Driller
23/8/1985
22/5/1989
23/12/1992
15/5/1995
11/4/2002
1/2/2008
11/3/2010
19/3/1989
22/6/1992
9/1/1995
10/4/2002
13/12/2007
20/1/2010
Till now
offshore
onshore
offshore
offshore
offshore
onshore
onshore
TRAINING COURSES:
1. Well cap supervisor validate 4/2011 &I.W.C. F .validate 2012
2. Basic Drill Technology
3. Safety Practice
4. Rig Mathematics
5. Fire Fighting and Fire Prevention
6. Personal Survival and rescue search
7. Stuck pipe
8. Helicopter escape
Driller
Current Job
§ Worked on both systems Kelly & Top Drive tesco.
§ Worked on both National Oil Well & Varco Top Drives
§ Worked on Caterpillar Engines 3512, 3406, 3512 B, 398 D
§ Worked on National Oil well & Continental Emesco Mud Pumps
§ Worked on National Oil well & Continental Emesco Draw works
Responsible for the drilling operations & field repair of all drilling problems concerning the well& Cyber systems experience
Job Essential Function
To liaise with rig manager, mechanic & electrician to schedule major overhauls of rig equipments
Roles
Personally responsible for own safety & conducting ones self to the standards of the company standards & policies
§ Carry out all duties in the safest possible manner & ensure that the personal protective equipment (PPE) is used correctly.
§ Take personnel responsibilities for & demonstrate leader ship in HSE.
§ Play a leading role in safety meetings & safety program
§ Supervise the drilling crew's activities
§ Work with the mechanic & other crew members to ensure that the rig is operated in accordance within the designed parameters & in conformance with all aspects of company rig management system
§ Conduct visual & where possible functional, inspections of equipment both prior to use & at periodic intervals.
§ Take responsibility for planned maintenance, certification, record-keeping & reporting.
said sehairi
-Contacted: 00213-665-01-98-43
- Email : saidsehairi@yahoo.com
QUALIFICATION TS INSTITUT ALGERIA WORKING
-Mechanic workshop
-Society operating carrier
-Society hydraulic
-Society petroleum industry Algeria
-Society petroleum challenger limited Benghazi Libya
-Job description
-Rig drilling and work over
-Mechanic industry, engine Volvo and caterpillar: 3406, 3408, 3412, D3506, D3508, 3512 General motors and Cummins
-Systems control come
-Mud pomp
MUKESH AGARWAL
Ph.No. 0091-268-2559797
Mo. NO. 91-9375102457
Email: mukesh_agarwal8001@yahoo.com
Application for the post of Asst. Driller
I am working in offshore scorpion ( intrepid) in Saudi Arabia under by KJO
LANGUAGES
1. English : can speak and write
1. Hindi : can speak and write
2. Gujarati : can speak and write
Education Qualification: Degree of bachelor of science
Successfully Completed course of IWCF Rotary Drilling Well Control Surface Bop
Stack
SUCCESSFULLY TRAINING COURSES : NAVAL MARITIME ACADEMY OFFSHORE MIMBAI -2006
);; Personal survival technique D.O.issued 19th April 2006
);; Personal safety and social responsibility D.O. Issued 22 April 2006
);; Fire Prevention and Fire fighting D.O. Issued 26 April 2006
);; Elementry first Aid D.O. Issued 29 April 2006
);; Helicopter underwater escape traning D.O. Issued 06 May 2006
BOSIET COURSE FROM GTSC ABUDABHI @ 2008
EMPLOYMENT HISTORY
Name of Organisation : Shivani Universal Limited. Post : Roustabout /FloorMan Period From : Dec 2002
Period To : Oct 2003
Operation : Work over drilling
Name of Organisation : Noble Charlie yester Mumbai offshore. Post : Floor man
Period From : Dec 2003
Period To : July 2004
Operation : Drilling jackup rig
Name of Organisation : Scorpion Courageous Oman
Post : Pump Man
Period From : Sep 2004
Period To : Oct 2005
Operation : Drilling jackup rig
Name of Organization : Scorpion Intrepid Saudi Arabia Post : DerrickMan /Traning A.D Period From : Dec 2005
Period To : 18 Aug 2010
Date Operation : Drilling jackup rig
Name of Organization : Cosal Drilling
Post : Asst. Driller
Period From : 25 Sept 2010 to till
RASHID ALI KHAN
APPLIED FOR RIG MECHANIC
Email: rashid.ali1983@ymail.com
Contact: 0092-301-5562756
WORKED EXPERIENCE IN DRILLING FIELD:
FROM TO POSITION COMPANY LOCATION
05-01-2006 Till Date RIG MECHANIC KCA DEUTAG Pakistan
18-03-2003 06-09-2005 RIG MECHANIC PAKISTAN OIL FIELDS Pakistan
EQUIPMENT WORKED WITH:
· Maintenance and Servicing of power Engines (Caterpillar).
· Draw works (National, Bomco )
· Hydraulic Disk Brake, Elmago Brake, pneumatic Brake
· Mud Pumps (National, Bomco )
· Air Compressor (Ingersoll Rand, Atlas Comco)
· Mud Agitator (Plenty Mixer. Now Brandt)
· Koomy Controls(Accumulator) Cameron, Cad
· Blow out control Equipments. (Cameron)
· Hydraulic Pumps.
· Hydraulic Hoisting System.
· Swivel Hydraulic Hooks.
· Crown Block.
· Traveling Block.(National 300,500 ton, American 500)
· Centrifugal Pumps(Mission Magnum, Halco 2500 Supreme)
· Top Drive (National Oil Well Varco TDS 9S 400 ton,11S 500 ton 800 HP)
· Nov iron roughneck ST80 & ST 120 OR similar
SAFETY TRAINING:
· H2S
· Fire fighting
· Environment
· Stepping, Handling & Lifting
· Rigging & Slinging
· Confined Space Entry
· Drug & Alcohol
· PPE
· First Aid+CPR
· Health & Hygiene
· Mechanical Module
· Work at Height
· Permit to Work
· Pressure level 1
· Hazard Identification (Level1)
· Electrical Safety
· Lockout-Tag out
· Mechanical lifting level (Level 1)
LANGUAGES:
English, Urdu.
QUALIFICATION:
· Metric
· F.A (Intermediate)
ahmed Salah El Den Morsy Hussien
Tel : 002-01065616412 – 002-096-5470928
E- Mail Address : alfonseabosalah@yahoo.com
Spoken Languages : Arabic – mother Tongue – english – Good
Previous Courses : First Aid &h2S , Helicopter Escape Under
Water Training
Work Experience
Curent Job : Roustabout
Employer: Egyotian chinese Drilling Co ( from : 04/2010 To : 06/2011)
Curent Job: floorman
Employer: National Drilling Company (Pico Libya) (from : 08/2011 To Till Now
Narayanan Venugopal
Tel : +91 9746469887( Mobile) / +91 7293311141(Res)
Email : venugopalalpy@gmail.com
I have total 15 yrs working experience in oil field at middle east, 8 yrs working experience in Rig field, Recently I was worked in Jagson Group Company in India. (3 yrs worked as a Rig Mechanic in Arabian Drilling Company, Saudi Arabia, 4 yrs worked as a Rig Mechanic in Kuwait Santafe Drilling Company, 2 yrs worked as a Mechanic in Kuwait Oil Company, Kuwait, 2 yrs worked as a mechanic in Al-Naboodah Group Of Company, Dubai, 4 yrs worked as a mechanic Al-Owaidah Group Of Company in Saudi Arabia.)
Duties and Responsibilities
I am able to maintain and troubleshoot, overhauling such as rig field machineries, responsible for the inspection, maintenance and field repair of all machinery and mechanical equipment on the rig, logistics equipment and camp in accordance with Company’s' Rig Management System (RMS). To ensure that all operation of machinery and mechanical equipment is carried out in a safe manner and in accordance with the manufacturer's specifications. To maintain all machinery and mechanical equipment on the rig and camp in accordance with Company's planned maintenance system sand to manufacturer's specifications.
To carry out unscheduled repairs to machinery and mechanical equipment at the rig site and camp. To liaise with the Rig Manager, Driller and Electrician to schedule major overhauls of rig equipment. To ensure the availability of adequate spare parts for mechanical equipment through the inventory system, both for routine maintenance and to cover unscheduled maintenance or replacements
ü Drawworks : National oil well E2000, E3000 daily routine checkup, monthly PMS task, lubrication checkup, break adjustment, high low clutch checkup.
ü Mudpumps : PZ-11, PZ-9, varco models daily routine checkup, monthly PMS task, lubrication checkup, crosshead clearance checkup, ponyrod change, oil seal change, belt adjustment, crankcase oil checkup and change, oil pump pressure adjust and replacing. pressure relief valve repairing, water pump repairing, lubricating oil lines check up.
ü Topdrive system : National oil well PS150-Varco-11SA-Canrig-1050E, Daily routine check up, monthly PMS, grab and dyes changing, Gear oil changing, hydraulic oil changing.
ü Engines: Caterpillar engines 3512, 3456, 399, 3406, Perkins, Cummins - periodic maintenance and troubleshooting, daily routine check up, monthly PMS.
ü Kellyspinner : Varco maintenance and oil change.
ü Air tugger : Ingersollrand maintenance and trouble shooting.
ü Agitator : Brandit maintenance, gear oil checkup and changed, motor between gear-box coupling alignment.
ü Air compressor : Ingersollrand, Garnderdenver, sullair, maintenance and trouble shooting, belt changing, hydraulic oil changing, filter changing.
ü Dewatering pump : Deutz maintenance and trouble shooting, periodically services. Centrifugal pumps 40HP, mixing pumps super charger pumps maintenance and trouble shooting.
ü Fire pump : Lister peter, deutuges maintenance and trouble shooting. Cooling water systems, Koomey unit Triplex pumps, Air pumps, Nitrogen filling, Pipe spinners. Rig safety equipments maintenance, Camp generator maintenance, Service vehicle maintenance, Good house keeping.
Educational Qualifications
- Diploma in Mechanical Engineering, May 1989
- I T E S Automobile Mechanical course, April 1981
- SSLC passed
Total 15 years
Saudi Arabia
3 years worked as Rig Mechanic at Saudi Arabia in prestigious concern Arabian Drilling Company, the best contractor from Saudi Aramco project (February 2005 to May 2008)
UAE : Millennium Offshore Services,Ajman Free Zone( 2010 )
Kuwait
4 years worked as a Rig Mechanic with Santafe Drilling Company (November 2000 to March 2004.)
2 years worked as a Mechanic Kuwait Oil Company (May 1995 to July 1997)
Dubai
2 years worked as a Mechanic at Al-Naboodah Group of Company (October 1998 to July 2000)
Saudi Arabia
4 years worked as a Mechanic at Al-Owaidha Group of Company Riyadh (October 1989 to July 1994)
Experience in India
Miechel Drilling Company in India (2010 to 2011)
7 years experience in LGB Group of companies at Tamil Nadu (January 1982 to October 1989)
Work experience
Preventive maintenance and overhauling, worked on following equipments
Ø Caterpillar : Top and major overhauling and Preventive maintenance (3512, 3456, 3412, 399 models)
Ø Detroit, Perkins, Deutz, Cementing units engines.
Ø Mudpumps : Carried out repairs and maintenance on Ideco, National oil well, Gardener denver pumps, PZ9, PZ11.
Ø Draw works : Carried out repairs and maintenance Ideco, Dreco, National oil well E2000model.
Ø Topdrives : Carried out repairs and maintenance, Varco TDS 11SA,3S, National oil well PS150 models.
Ø Compressors : Preventive maintenance and overhauling, Ingersollrand, Gardener denver, Sullair.
Ø Centrifugal pumps : Repair and maintenance carried out Harrisburg mission pumps, Demco, Dreco pumps for drillwater, Seawater, Potwater, Mud mixing.
Ø Pipe spinner : Varco, Javlin pipe handler, Kelly spinner.
Ø Koomey unit : Maintenance and repairing Triplex pumps, Air operating pumps.
Ø Agitator, Breathing cylinders Fire pumps, Emergency, Camp generators, Rigfloor accessories equipments, Airtugger, Manrider from Ingersoll-Rand, Welden pump, Welding machines. daily check list checking, monthly PMS, Generator servicing, Petrol and Dieselcar servicing and oil changes.
Safety courses
STCW-95 courses passed on June 2011
Ø HUET
Ø Personal Survival Techniques
Ø Elementry First aid
Ø Fire prevention and Fire fighting
passed from Schlumberger
Ø Mechanical module
Ø Rig site fire fighting
Ø H2s course
Ø First aid with CPR
Mohamed Soliman Nagib
Email: msoliman001@yahoo.com
Phone: 002-0103570333
EXPERIENCE:
18 Years Experience in the Drilling Industry with Santa Fe / GlobalSantaFe Drilling Company in Egypt Zone and Middle East including major projects / shipyards / upgrades.
CURRENT POSITION: Assistant Driller
EMPLOYMENT HISTORY:
1992 – 2002: Employed By Santa Fe International Corp... Egypt Zone
As A Painter, Roustabout & Roughneck on different Rigs.
2002 - 2004: Employed By Santa Fe international Corp. Saudi Arabia zone
As Derrick Man on Rig Key Hawaii
2004 – 2007: Employed By Global Santa Fe International as Assistant Driller
On Rig Key Hawaii in QATAR zone.
June 2007 - Present: Employed By Global Santa Fe & Transocean Oilfield
Service
2009 - 2011: Worked for Transocean as assistant Driller on Rig GSF AD10
Employee Name:
Mohamed Soliman Nagib
Position:
ASST DRILLER
* Training History
Course Description
Course Code
Completion Date
Drilling Practices
WW-DL-I-DPR
02-Dec-2010
Dropped Object Awareness - Rig
WW-SF-O-DOAT
07-Jun-2010
Environmental Leadership Tng
CC-EV-C-ELT
05-Jun-2010
IADC Well CAP Supervisor Level
WW-DL-I-WCS
08-Apr-2010
Banks man Slinger OJT
CC-SF-O-BS
02-Apr-2010
Safety Leadership Training
WW-SF-O-SLT
29-Mar-2010
BOSIET - Offshore Survival
CC-SF-I-BOSIET
09-Dec-2009
RMS Training
WW-MT-I-RMSM
21-Jun-2009
Firewatcher
CC-SF-O-FWR
05-Jun-2009
QHSE Health and Safety Quiz
CC-SF-O-HSQ
31-May-2009
Elementary First Aid OJT
WW-HT-O-FTA
04-Apr-2009
HSE ADDITIONAL RIG BASED TRAINING
WW-SF-O-HSEL1
04-Apr-2009
Pathogens Awareness
WW-HT-O-PATH
04-Apr-2009
Fall Protection Awareness
WW-SF-O-FPR
28-Mar-2009
Permit to Work OJT
WW-SF-O-PTW
27-Mar-2009
Confined Space Entry
WW-SF-O-CSE
26-Mar-2009
Hazardous Materials Awareness
WW-SF-O-HMA
21-Feb-2009
DONUT SYSTEM USER
7726FPS
02-Feb-2009
H2S ALIVE
CC-SF-I-H2S
04-Sep-2008
HSE Add. Rig Based Pre Phase 3
WW-SF-O-HSEL1-XX
13-May-2008
HSE OJT Pre Phase 3 -
WW-SF-O-HSE-XX
13-May-2008
Respiratory Fit Test (Quant)
CC-SF-I-RFT
23-Mar-2008
Respiratory Protection Program
CC-HT-O-RESP
21-Mar-2008
BOP Equipment OJT
WW-MT-O-BPE
19-Mar-2008
HAZARD COMMUNICATION OFFSHORE
6503FPS
18-Jan-2008
GSF Certified Rigging Program
CUR3YW
30-Sep-2007
SURVIVAL- WATER/HELI EGRESS
7654gsf
15-Aug-2007
H2S SCHOOL
8140FPS
06-Aug-2007
Helicopter Safety Awareness
WW-SF-O-HS
18-May-2007
Permit to Work Role Specific
EEX0VA
15-Dec-2006
Well Cntr Surface Driller IWCF
CC-DL-E-SDIWCF
21-Sep-2006
OPIP Workshop
AAQ9J3
20-Jul-2006
H2S TRAINING
CC-SF-O-H2S
08-Jul-2006
SPILL PREVENTION
6504fps
23-May-2006
DRILLER VTM
9336FPS
27-Mar-2006
ADVANCED SAFETY AUDIT
6111FPS
10-Jul-2005
DRUG & ALCOHOL AWRNS SUPV
GM-HT-O-DOTS
18-Apr-2005
CONFINED SPACE ENTRY AWARENESS
7638FPS
11-Apr-2005
SAFETY MANAGEMENT LEADERSHIP
7111xx
29-Mar-2005
Driller VTM Start Card
AAS12M
09-Feb-2005
ASBESTOS AWARENESS - 2 hour
6519FPS
06-Nov-2004
Well Cntl Surface Supv IWCF
CC-DL-E-SSIWCF
28-Oct-2004
FOCUS
6153FPS
10-Oct-2004
HUET
CC-SF-I-HUET
20-Jun-2004
Medical Examination
CC-E-S-ME
20-Jun-2004
OFFSHORE MEDIC
7611xx
20-Jun-2004
DRUG & ALCOHOL AWRNS EMPLOYEE
9326FPS
10-Feb-2004
ENVIRONMENTAL TRAINING (TEAM)
6517FPS
13-Jan-2004
FOCUS I
6108FPS
11-Sep-2003
DRUG & ALCOHOL AWARENESS EMP.
GM-HT-O-DOTE
09-Sep-2003
FORK LIFT
6601FPS
09-Sep-2003
GALLEY PRACTICES-FOOD HANDLING
6555FPS
09-Sep-2003
LOCKOUT/TAGOUT SYSTEM
7539FPS
09-Sep-2003
ANDREW P ALCANTARA
Cell Phone no. 09082177988
Cell Globe no. 09064480156
Email Add: drewhse@yahoo.com
Objective: Environmental, Health & Safety Loss Prevention staff position
HSE Skills:
Ø Identifies and controls site hazard before and during Construction stage.
Ø Educated Experience good knowledge about safety field.
Ø Having the sense of responsibility and guts to take initiatives and respect rules and regulation.
Ø Excellent leadership and communication skills physical strength and hands on computer.
Ø Knowledgeable in identifying, evaluating, developing, implementing hazard control design methods procedures and program prepare safety reports, conduct safety orientation and implement safety policy.
Professional Work Experience:
Designation: Health Safety Environment (HSE) Senior Project HSE Officer Project handled: National Headquarters Qatar Foundation Company: Midmac Contracting Company W.L.L. Doha Qatar Date: March 6, 2012-Present
Designation: Health Safety Environment (HSE) Project Safety Officer Project handled: PNU Princess Noura Bint Abdul Rahman University Riyadh Saudi Arabia Elecro-Mechanical Specialized Engineering Elevator Project Company: Thyssen Technik Arabia Co. Ltd Date: November 15, 2010 to November 15, 2011
Duties and Responsibilities:
Ø Responsible for coordinating all HSE requirements of basic and Technical engineering activities. Provided HSE input for all project stages and coordinated with Technical Operation Manager and ensure HSE practices are observed and adhered to during each stage of the project.
Ø Coordinated facility tours and inspections to detect potential or existing hazards and implemented corrective actions.
Ø Reported directly to the Company General Manager on a daily basis to ensure compliance of all HSE requirements. Supported the provision of independent technical expertise on all aspects of HSE Management. Developed and conducted Emergency Response Procedures in order to reduce / prevent the risk to personnel, assets, and company repute.
Ø Worked as an HSE representative on elevator installation projects Responsible for Safety Meetings, Toolbox Talk, Safety orientation for Elevator Technicians, Field Audits, External and Internal Safety Inspections. Safety observation reporting to the GM and TOM on a daily basis.
Ø Accident investigations and root cause analysis. Developed contingence plans for all critical lifts, Scaffold safety, and electrical energy isolation procedures. Responsible for leading and consolidating HSE operational and project activities.
Ø Analyzes hazardous conditions conduct risk assessment and budget corrective action. Evaluates hazardous condition and recommends engineering control. Advice Technical operation manager and Site Project Manager in safety compliance.
Designation: Health Safety Environment Officer (HSE) Staff Project handled: Leyte Geothermal Plant Company: PNOC Energy Development Corporation. Date: December 2, 2008 to August 28, 2010
Duties and Responsibilities:
Ø Observes and complies with existing company codes, policies, agreements, rules and regulations. Conducts regular inspection, facilities, work areas, tools and equipment of the company; observes work methods and procedures of workers to determine unsafe working conditions and practices. Investigates accidents by spot inspection and interrogation of parties and/or witnesses involved to determine cause and prevent recurrence of same.
Ø Prepares reports based on inspection, observation and investigation; recommending measures and methods of eliminating unsafe working conditions and procedures.
Conducts periodic safety seminars and training through field demonstrations and/or lectures on safety practices, accident prevention measures and defensive driving techniques.
Ø Administers different tests to applicant drivers and company employees seeking authority to drive and operate company vehicles to determine driving proficiency. Orient newly hired employees on safety practices.
Attends and/or participates on regular safety meetings within and outside the company.
Ø Monitors proper housekeeping and cleaning of the work area including tools, and equipment, vehicles, supplies, etc.
monitors safety rules and regulations in the work area.
Ø Ensure contractor quality and compliance through use of audits and inspection of contractors/ supplier HSE programs and implementation. Monitor management of safety in operation and provides feedback to management.
Ø Participates in contractor safety meetings. Monitor contractor safety performance & provide feedback to management. Supports group and equipment inspections, risk identification/ mitigation, and program input. The key measure is quality management of safety, achieving levels of risk as reasonably practicable, and programs goals of zero lost time incident with all operation in compliance with regulations and policy.
Designation: Deck Rating Gross Ton/Kilowatt: 1150/1460 Type of vessel: M/V Tennesi walker Trade: Coastwise Philippines Type of Vessel: General Cargo Company: OMA and Ship Management Manila Philippines. Date: August 24, 2007 to September 9, 2008
Duties and Responsibilities:
Participate in safety meeting Conducted by chief officer, Responsible for Deck watch keeping navigation communication, navigation chart, log book. Seamanship work assign by the chief officer
Perform duty as ordinary seaman in cargo hold. Assist able-bodied seaman for loading and discharging of cargo load. Report unsafe act and condition immediately to ship officer.
International Safety Training Seminar:
Course: Advance Occupational Safety and Health for Construction , Petrochemical Oil and Gas Industry. Safety Officer Training Course Venue: Rodech Training Services Link International. Makati city Philippines. Date: Sept 29, 2008- Oct 15, 2008
Course: Oil and Gas Offshore and Onshore Drilling Technology Venue: Rodech Training Services Link International. Makati city Philippines. Date: Oct 9-11, 2008
Course: Oil Rig Familiarization Rigpass Safety Orientation Venue: Rodech Training Services Link International. Makati city Philippines. Date: Sept 29-Oct 8, 2008
Course: Hydrogen Sulfide Safety and SCABA Instruction Venue: Rodech Training Services Link International. Makati city Philippines. Date: Oct 13, 2008
Course: Standard First Aid with Professional CPR Instruction. Venue: Rodech Training Services Link International. Makati city Philippines. Date: Oct 14, 2008
Course: Basic Safety Training and Sea Survival. Fire Prevention and Fire Fighting Personal Survival Technique Personal Safety and Social Responsibility Elementary first aid Venue: Magsaysay Training Center Manila city Philippines Date: March 7-9, 2007
In House Training and Safety Seminar:
Course: Permit To Work Seminar Course: Log-out Tag out Procedures Venue: PNOC Energy Development Corp. Venue: PNOC Energy Development Corp. November 9, 2009 November 15, 2009
Course: Electrical and Fire Safety Course: Crane and Heavy Equipment Safety Venue: PNOC Energy Development Corp. Venue: PNOC Energy Development Corp. Sept 4, 2009 November 24, 2009
Course: Hazard Material Communication (Hazcom) Course: Personal Protective Equipment Venue: PNOC Energy Development Corp. Venue: PNOC Energy Development Corp. September 8, 2009 December 3, 2009
Course: Confined Space Entry Permit Course: Excavation Safety Venue: PNOC Energy Development Corp. Venue: PNOC Energy Development Corp. September 15, 2009 July 19, 2009
Course: Scaffold Safety Course: Construction Safety Venue: PNOC Energy Development Corp. Venue: PNOC Energy Development Corp. August 16, 2009 July 17, 2009
Course: Ladder Safety Course: Hazard Recognition and control Venue: PNOC Energy Development Corp. Venue: PNOC Energy Development Corp. December 12, 2009 February 5, 2009
Course: Accident Investigation Course: Management and Control Venue: Thyssen Technik Arabia Co. Ltd Venue: Thyssen Technik Arabia Co. Ltd February 2, 2011 February 3, 2011
In House Supervisory Training: Midmac Contracting Co.
Fall protection: March 8, 2012 Walkthrough Observation: March 15, 2012 Supervisory Level Responsibility: March 22, 2012 Hilti Power Tools Safety: March 29, 2012 Basic Hand tools Safety : April 5, 2012
Activities:
Certificate of Recognition: as Model Battalion during Naval Reserve Center National Capital Region Annual General Tactical Inspection Fort Bonifacio Marine Barracks Manila Philippine Navy Armed Forces of the Philippines. March 20, 2005
Accreditation and License held:
Safety Officer Training Course SOTC No. SOTC10080570IADC USA Certificate of Competency STCW 95 No. RP0813110032882 International Association of Drilling Contractors IADC Rigpass No. IADCA1106526 RP520 Seafarer Identification and Record book SIRB B0829203 DOTC/Marina Basic Safety Training SOLAS No. Panama MOA21007030004 SRC Registration No. PNCR1430407
Membership in Organization:
International Association of Safety Professional Philippine Member International Association of Drilling Contractors. Philippine Member: 129956 IADC RIGPASS No.IADCA1106526 RP520
Educational Attainment:
College: Philippine Merchant Marine School Metro Manila Philippines Course: Bachelor of Science in Marine Transportation (2004 -2007)
Belkacem Kamele
Name.firstBELKACEMName.lastKAMELEmailkamelbel1960@yahoo.comCommentAV. C N° 04 City Ayad Téléphone: (00213) 0773 53 16 28 : (00213) 0664 22 53 06 / 0096895907048*Oman* Touggourt 30200 Email: kamelbel1960@yahoo.com (W) Ouargla-Algeria Kamel Belkacem PME- Mechanical Drilling Civil statement Date of birth: May 04th 1960 Placer of birth: TOUGGOURT Nationality: ALGERIAN Marital Status: Married + 6 Children Professional experience • 2011/ 2012 :PME- chief Mechanic abrag energy Oman • 2010 : PME- Chief Mechanic weatherford -WDI- INTERNATIONAL DRILLING -AR • 2009/2010: PME- Chief Mechanic drilling Rig 3 KARACHI- PAKISTAN. • 2008: Supervisor Chief Mechanic drilling Rig # 12 DALMA ENERGY ALGERIA. • 2007 / 08: Supervisor Chief Mechanic drilling, Rig #79, SCHLUMBERGER / OMAN. • 2007: Supervisor Chief Mechanic drilling, Rig #15, SCHLUMBERGER / PAKISTAN. • Jan-06-07 Supervisor/TESCO Top drive at N.W.D. #9 Rig – LIBYA • 2005: Supervisor Top drives E.N.T.P. – H. M. D. ALGERIA. • May-04: TECHNICIAN/TESCO Top Drive Corporation of CANADA-Hassi Messaoud-ALGERIA. • Jan-04: Chief mechanic/Challenger drilling co.-Rig#28 -LIBYA. • 2002-2003: Technician mechanic/ Top driver drilling co. (NABORS) - Rig #779- Algeria. • 1999-2001: Chief mechanic/ Rig #47 & 49 & intervention work shop base/ SCHLUMBERGER drilling co. Hassi Messaoud -Algeria. • 1997-1999: Chief mechanic/ Rig #48 SEDCO FOREX (HMD). • 1990-1997: Chief of shop company drilling Algeria- Algeria. • 1983-1990: Technician mechanic drilling (Work shop & Rig) - ENAFOR co. Hassi Messaoud. Education/Training Courses • 2008: Diploma - Expanding our Culture Beyond Safety (SCHLUMBERGER – OMAN ) • 2007: TRAINING COURS-CAM. • 2006 : HEALTH and safety certificate - medilink international - LIBYA • 2003: Diploma - Modular: HSE training program - NABORS. • 2000: Diploma - Modular: HSE Training program - SCHLUMBERGER. • 1996 : Diploma - Mechanical engineering - (Institute N. Algeria • 1992 : Etude superiore - Diplomate - Licence - Algeria UNIVERSITY • 1989 : Institute de formation C.F. Caterpillar - Bergerat - France Education • Diploma (DRAWORK 1500-MUD-PUMP - TOP DRIVE - SAFETY PPI - SAFETY MEDICAL - FORKLIFT) • Diploma. Technical mechanical drilling institute national de petrol-Hassi Messaoud • CAP Mention very good-Mechanical (Auto & Diesel) Touggourt. • CFP : Technician Mechanic. • DIPLOMA DRAWWORSK SS GD -360 – VFD ELECTRIC – (1500 HP) - TDS /AS11 varco. • Diploma Mud-Pump 1700 PT – CAT 3512 – Pipe Cat – Rig 3000 HP. (Bad Bentheim Germany). Other skills Defensive driving: Category (A + B), SCHLUMBERGER Maintenance industrials work shop Diploma in international HSE Diploma beyond Safety Diploma Rig Pass Course Diploma Permit to Work Holder Diploma Rig Sling Language Arabic: Mother tongue. French: Good (spoken & writing). English: good (known and writing).
Ashraf Fathy Abd El Samea
Telephone : 002-01096765218
002-0122-4022825, 002-01006621373
Email : ashraf.fathy71@yahoo.co.uk
Objective
Seeking a position as an Assistant Driller on an Offshore/Onshore Drilling Installation.
Experience
2005–Present TransOcean International Mediterranean, Egypt
Assistant Driller
§ Working as an Assistant Driller for TransOcean International Drilling Company and working for British Petroleum (BP) drilling HTHP wells around areas in the Mediterranean Sea.
2001–2005 Santa Fe International Red Sea, Egypt
Derrick Man
§ Working as a Derrick Man for Santa Fe International Drilling Company and working for several key clients in Egypt including Gupco, Suco & Petrobel drilling wells around areas in the Red Sea.
§ Working as Derrick Man for Santa Fe International Drilling Company and working for a esteemed French company in areas in Eritrea's Red Sea.
1997–2001 Santa Fe International Red Sea, Egypt
Floor Man
§ Working as a Floor Man for Santa Fe International Drilling Company and working for several key clients in Egypt including Gupco, Suco & Petrobel drilling wells around areas in the Red Sea.
1992–1997 Santa Fe International Red Sea, Egypt
Roustabout
§ Working as a Roustabout for Santa Fe International Drilling Company and working for several key clients in Egypt including Gupco, Suco & Petrobel drilling wells around areas in the Red Sea.
Language
Arabic: Mother Tongue, English: Good.
Education
1984–1986 Industrial School of Ras Ghareb Ras Ghareb, EGYPT
§ Diploma in Industrial electricity.
Training Courses
Had Several and professional training including training courses and Hands-On instructions throughout my career Including:
§ Well Cap Fundamental Expire 2013
§ Perenco H.P.H.T
§ MPD (Managing Pressure while Drilling)
§ HUET (Helicopter Underwater Escape Training)
§ Permit to Work
§ Sea Survival
§ Derrick Man Training (Vocational Training Module )
§ Fork Lift Training & License
§ Banks Man / Slinger Training
§ Stop Safety program
§ Confined Space Entry
§ Lock Out / Tag Out Procedures
§ Personal Survival
§ Total Environment Awareness & Management
§ Risk Assessment Training & Hazard Identification
§ Advance Fire Fighting
§ MSDS (Safely Handling Chemicals)
§ Floor Man Training (Vocational Training Module )
§ Spill Prevention Training
§ Field Observation & Continuously Upgrading Safety (Focus 1 2 3)
§ Medical First Aid
§ Haz-COM
§ Helicopter Training
§ Respiratory Training
FRANCISCO EDWIN RODRIGUES
Telephone Mobile: +919323133650
Email: rodriguesfranciscoedwin@yahoo.com
_______________________________________________________________________________________
Consultant Drilling Supervisor (Day) well experienced with managing drilling contractor + service company personnel & with a good knowledge of Well-site Drilling Program implementation, Drilling Operations, Mud Engineering & Formation Geology, seeks a DRILLING SUPERVISOR (COMPANY MAN) assignment
STRENGTHS
· Strong leadership skills in a multi-cultural environment. Leads by example & respect
· Lays a strong emphasis on nurturing a united & dedicated wellsite team
· Highly efficient with managing drilling contractor & service company personnel
· Adept at precise & complete wellsite reporting i.e. accurate DAILY DRILLING REPORTS
· Hard-working & resulted-oriented, with a go-getter attitude
· Strong & inspirational HSE LEADERSHIP drive
EDUCATION, TRAINING & MARINE COMPETENCIES
· “Bachelors Degree in Engineering (Electrical)” - First Class Honors Degree, Goa University (Nov 1996)
· “IWCF (International Well Control Forum) Drilling Supervisor, COMBINED SURFACE & SUBSEA BOP (Blow Out Preventer) STACK” (Aug 2011)
· “Management Development Course for Drilling Superintendents & Drilling Managers”. Training program conducted by Setrac College of Offshore Training (SCOT), Navi Mumbai (Mar 2012)
· “Drilling Data Input System (DDIS)” i.e. Daily Drilling Morning Report software
· “Accident Investigation & Reporting”. Maritime training course conducted by Setrac College of Offshore Training, Navi Mumbai (Mar 2012)
· “Stuck Pipe Prevention”. Drilling training course conducted by SCOT, Navi Mumbai, (Feb 2012)
· “Horizontal & Directional Drilling”. Drilling training course conducted by SCOT, (Feb 2012)
· “ISM (International Safety Management) Course”. Maritime training course conducted by GSMS Maritime Training Institute, Mumbai (Feb 2011)
· “Ship Security Officer” i.e. SSO Course (International Ship & Port Facility Security i.e. ISPS Code). Maritime training course conducted by GSMS Maritime Training Institute, Mumbai (Feb 2011)
· “Helicopter Landing Officer” i.e. HLO Course. Maritime training program conducted by GSMS Maritime Training Institute, Mumbai (Feb 2011)
· “Anchor Handling Course”. Advanced maritime training course conducted by Setrac College of Offshore Training, Navi Mumbai
· “Towing Operations Course”. Advanced maritime training course conducted by Setrac College of Offshore Training, Navi Mumbai
· “Lead Auditor - OHSAS 18001 Occupational Health & Safety Assessment Series”. IRCA (International Register of Certified Auditors) registered program conducted by Bureau Veritas
· “Lead Auditor - EMS 14001 Environmental Management System”. IRCA (International Register of Certified Auditors) registered program conducted by Lloyd’s Register
· “Lead Auditor - ISO 9001 Quality Management System”. IRCA (International Register of Certified Auditors) registered program conducted by Moody International
· “Project Planning & Management Techniques”. Training program conducted by Emirates Education Center, Dubai
· “BOSIET (Basic Offshore Safety Induction & Emergency Training)” - Maritime training course conducted by GSMS Maritime Training Institute, Mumbai (Feb 2011)
· “Hydrogen Sulfide (H2S) Safety”. GSMS Maritime Training Institute, Mumbai (Feb 2011)
· “Helicopter Underwater Escape Training (HUET)” - Maritime training course conducted by the Naval Maritime Academy (Indian Navy) at Indian Naval Base - INS Kunjali, Mumbai
· INDOS certified Seafarer - INDOS (Indian National Database of Seafarers, Government of India) lifetime registration
· Panama CDC (i.e. Seaman Book) : Possess a valid Government of Panama CDC
· Indian CDC (i.e. Seaman Book) : Possess a valid Government of India CDC
Completed the following IMO (International Maritime Organization) modular maritime training courses (STCW 95 - Standards of Training, Certification & Watchkeeping for Seafarers, Reg. VI/1, STCW Code A, Table A-VI / 1-1 to 4)
· Personal Survival Techniques (i.e. Sea Survival)
· Fire Prevention & Fire Fighting
· First Aid
· Personal Safety & Social Responsibilities
MARITIME COMMAND & CONTROL TRAINING
Completed the following advanced Maritime Command & Control training courses conducted by Setrac College of Offshore Training, Navi Mumbai
· “OFFSHORE INSTALLATION MANAGER (OIM)” Course
· “MANAGEMENT OF MAJOR EMERGENCIES (MOME)” Course
· “OFFSHORE EMERGENCY RESPONSE TEAM LEADER (OERTL)” Course
WORK EXPERIENCE
CONSULTANT DRILLING SUPERVISOR - DAY (i.e. "Company Man") [Dec 2011 to present]
Operator - GNPOC, Sudan
· Well-site based, on a 28 days on 28 days off roster
· Manage execution of operations carried out by the rig, following the Drilling Program & according to Company & Well Engineering standards
· Ensure all well operations are conducted in accordance with the approved Drilling Program & in compliance with HSE Management System, Statutory Regulations & good oilfield practices
· Manage the well-site organisation in order to deliver wells in an efficient & cost effective manner
· Ensure the drilling contractor & service companies are fully briefed about the Drilling Program
· Provide leadership, supervision & guidance to technical staff & contractors on the rig
· Ensure accuracy of well-site reporting in the Drilling Data Input System (DDIS) software & email the DAILY DRILLING REPORTS (Daily Drilling Report, Daily Drilling Cost Report, Drilling Curve, Used Bit Inventory, Daily Mud Report, POB) to the Drilling Superintendent
· Have daily telephone meeting with Drilling Superintendent to update progress on well-site activities
· Ensure all well operations are conducted in a safe & efficient manner & in compliance with HSE Policy. Encourage & actively participate in safety systems & initiatives
· Co-ordinate rig site response to incidents & accidents. Responsible for doing a first-line investigation & reporting of all incidents & accidents on the location
· Manage logistics of drilling operations in an efficient manner by ensuring service personnel are requested & arrive at the rig in a timely manner & that they depart the rig on completion of their work scope & also by ensuring that materials & rental equipment arrive at the rig in a timely manner & that rental equipment is discharged from the rig promptly when no longer required
· Ensure all tools & drill string components are right are fit for purpose & compatible with the well & other components to minimize rig downtime & optimize drilling performance
· Identify areas of inefficiency & bring to attention of relevant contractor & the Drilling Superintendent
· Initiate / participate in safety meetings
· Supervise critical operations & ensure potential problems are identified & contingency plans in place
· Monitor Well costs & AUTHORITY FOR EXPENDITURE (AFE). Ensure all drilling operations are conducted within budget & schedule through efficient planning & management of resources
· Prepare "Well-End Summary" at the end of each well
WELL PLANNER [Jan 2009 to Nov 2011]
DEEPWATER, Water Depth - 1400 meters (4600 feet). “FDPSO Azurite” (“FDPSO” = “Floating DRILLING Production Storage & Offloading” Vessel, i.e. Producing DRILLSHIP)
Prosafe Production Services Limited, Congo - Singapore - India, (Operator - Murphy Oil)
· Was based offshore at well-site, onboard “Azurite” in Congo deepwaters (on a 28 / 28 days roster)
· Planned & co-ordinated daily activities on rig towards effective implementation of the Drilling Program
· Closely monitored drilling & related services work of contractors, for adherence to scheduled deadlines & in accordance with the Drilling Program
· Assisted the Drilling Supervisor in compiling the DAILY DRILLING REPORTS
· Monitored Well costs & AUTHORITY FOR EXPENDITURE (AFE). Ensured all drilling operations were conducted within budget & schedule through efficient planning & management of resources
· Monitored Drilling Curves, Used Bit Inventory & POB
· Co-ordinated with shore office to facilitate logistics of crew, equipment, helicopters & supply boats
· Provided logistical & schedule management to Drilling operations & planned manning levels
· Planned, reviewed & directed material, equipment & services required for the Drilling Program & followed up to ensure adequate & timely supply
· Monitored progress & updated various Operations Plans including Wells Subsea Construction Plan & Drilling Schedule
· Ensured safety had the highest priority & was at the forefront of well planning & execution
· Planned advancement of Congolese National staff & ensured a “Training Matrix” & “Succession Plan” was in place for all key skills to deliver technical competence & personal development
ASSISTANT DRILLER [Jan 2008 to Dec 2008]
Offshore, onboard SEMI-SUBMERSIBLE Drilling Rig “Energy Driller”. Water Depth - 1000 ft
Jet Drilling (S) Pte. Limited, Singapore, (Operator - ONGC)
· Was based onboard Rig “Energy Driller” (on a 28 / 28 days roster)
· Assisted in rig upgrade & maintenance works carried out on Semi-Submersible Drilling Rig “Energy Driller” at ST Marine Shipyard, Singapore in preparation for a 3 year drilling contract offshore India
· Aided marine department in installation of ballast water pumps, down in the ballast columns
· Conducted “Pre-Tour Safety Meeting”
· Aided in installation of Motion Compensator for trial
· Attended JSA & RHA Meetings prior to commencement of hazardous operations
· Advocated a proactive approach to Safety
CONTRACTS ADMINISTRATOR [Dec 2002 - Dec 2007]
APS Dubai Limited, Dubai : A multinational company providing maintenance engineering services to OFFSHORE Oil Production & Drilling Facilities
· Provided adequate resources for optimized management of offshore engineering contracts
· Interacted with clients & monitored works progress to meet contractual requirements
· Co-ordinated logistics of offshore crew, equipment & material
ASSISTANT CO-ORDINATOR [Apr 2000 - Nov 2002]
International Inspection Services Limited, (Lamprell JACK-UP RIG CONSTRUCTION YARD), Sharjah : Inspection division of the “Lamprell Energy” group - an Offshore Engineering group with expertise in Jack-up Drilling Rigs - new build construction, upgrade & refurbishment
· Based in Lamprell Jack-up Rig Construction Yard at Port Khalid (Sharjah Seaport) & rdinated operations of the Inspection Division which included Non Destructive Testing (NDT), PWHT, Welding Inspection, QA/QC, etc., carried out onboard Jack-up Drilling Rigs
· Co-ordinated work schedules of crews
PROJECT PLANNING ENGINEER [Nov 1996 - Mar 2000]
Goa Handling Controls (P) Limited, Goa : A large engineering company providing heavy fabrication & maintenance services to Oil, Petrochemical, OFFSHORE Petroleum industries & to Naval vessels
· Prepared projects activity plans in consultation with Projects Manager
· Interacted with core technical teams to expedite execution of projects activities to planned schedules
ZORAN RAJIC
Tel:+38523393035; Mob.+385981643778
e-mail: zoran.rajic1@gmail.com
PERSONAL STATEMENT OF OBJECTIVE:
I am ambitious, hard working individual with many years diverse experience in my chosen profession already. I wish to further invest myself in Catering Services where my international experience and my professional and human qualities will be an incontestable asset for a dynamic and ambitious company. I have a wealth of experience in differing roles including Chief, Onshore & Offshore Camp Boss, over 20 years.
EDUCATION AND TRAINING:
CATERING COOK III DGREE CERTIFICATE, Cert.No.01-III-126/84 issued in Sarajevo on 10/06/1986
FAMILIARIZATION TRAINING , STCW regulation VI/1, issued in 17/02/2000
BAISIC TRAINING, STCW regulation VI/1,issued in 24/12/2001
MEDICAL FIRST AID, STCW regulation VI/4. issued in 22/12/2004
ADVANCED MEDICAL AIDER, RGIT Aberdeen,issued 2012
OPITO, RGIT Aberdeen,issued 2008
CBT COURSE, Seagull AS.(ID 9569),issued in 2005
BOSIET, RGIT Aberdeen, issued 2012
MIST, RGIT Aberden,issued 2012
HUET, RGIT Aberdeen ,issued 2012
BASIC FOOD HYGIENE, Vroon in-house training, issued 2009
OGUK OFFSHORE MEDICAL CERTIFICATE, Aberdeen, issued 2012
OPERATIONAL OFFSHORE EXPERIENCE:
10.04.2008: VROON OFFSHORE - ERRV- COOK - AMA (Present)
13/06/2006: FRATELLI COSULICH SPA - (FPSO, ONSHORE CAMP, BARGE) - CHIEF COOK, CAMP BOSS
27/10/2004: OSM NORWAY - AHTS - CHIEF COOK
22/06/2001: BOA OFFSHORE NORWAY – AHTS - CHIEF COOK
SKILLS: Proven ability to relate and communicate with people of all nationalities and backgrounds. Adept at ensuring day-to-day efficient running of large multinational contracts.
Excellent organisational skills – personnel, transportation, maintenance, equipment, supplies, etc.
Have the ability and experience to prepare quality variety dishes in the stipulated time.
Have expertise in variety of techniques in cooking to prepare healthy tasty dishes.
Shazly Fawzey Saleem Shahat
Email: man.shazly@yahoo.com
Tel: 002-096-5472533 & 01093942435 & 01112378603
Floor Man
The Position
Language Skills
Language : English ( Good )
Educational Skills
Qualification : Diplome Of Industrial School
Experience Land Rig & Offshore Rig
Seq.
Company
Position
Form
To
1
Egyptian Chinese Drilling
Floor Man
18/10/2009
Till Now
Training Course
1- Course Fire fighting And Fir Preventation.
2- Course FIRST Aid.
3- Course H2S.
DILAWAR ABBAS
APPLIED FOR ASSISTANT DRILLER
Email: sahilg110@gmail.com
Mob: +92-331-5458602
+92-345-5329530
TECHNICAL COURSE:
INTERNATIONAL PETROLEUM CERTIFICATE DRILLER LEVEL FROM IPC
Certificate No: D 64586 / PK 550 / 0998
Expiry: January 04th, 2014
WORKED EXPERIENCE IN DRILLING FIELD:
From to position Company Location
May 2009 till date Assistant Driller CCDC (CNPC) Pakistan
Jan 2007 May 2009 Derrick Man GWDC (CNPC) Pakistan
Feb 2005 Jan 2007 Floor Man GWDC (CNPC) Pakistan
Jan 2004 Jan 2005 Roustabout OGDCL Pakistan
RIGS TYPES
I have experience in both type of rig ELECTRICAL and MECHANICAL rig. And also worked
with Kelly and Top Drive System (TDS),( and now I am working Joy Stick Brake .)
EQUIPMENT WORKED WITH:
1 Varco Compact Racker (Pipe Stand Racker Arm)
2 ST-80 Iron Roughneck 80,000 ft/ Ibs up to 8 ½” OD.
3 CRT Casing Running Tool
4 Stand Hand II, for making DP Stand
5 NOV TDS-8SA 1150HP, 270RPM, 62, 500 ft/Ibs Drilling Torque.
TDS
1 National Oil well Varco TDS 8SA: AC Powered with PH-100 Pipe handler
2 Varco IISA AC Powered, Varco TDS 4H
MUD PUMP
1 National 10-P-130,
2 Bomco F-1600
DRAW WORKS
1 National 1320 UE 2000
2 Bomco 15 to 2000 HP
3 Hydraulic Disk Brake.
4 EDR System.
LANGUAGES:
English, Urdu,
SAFETY TRAINING:
1 H2S
2 Fire fighting
3 Environment
4 Stepping, Handling & Lifting
5 Rigging & Slinging
6 First Aid
7 Electrical
8 Crane Operations
9 Work at Height
10 Permit to Work.
MY JOB RESPONSIBILITIES AND TASKS
· Control all operations performed under his supervision ensuring they are carried out in a safe and efficient manner.
· Responsible for ensuring the Floormen and Derrickman are correctly deployed for ongoing and upcoming operations, and that they are familiar with the equipment in use and its safe operation.
· Execute instructions from the Driller and Toolpusher.
· Ensure the drilling operation is carried out as defined in the approved Operator's Instructions and Drilling Programme, and the operation is executed in accordance with Stena's Drilling Operation Manual and RSWMs.
· Responsible for ensuring the Drilling Crew perform Planned Maintenance on drilling equipment thoroughly and timely, and that it is recorded on the PM sheets.
· Carry out daily checks to include ensuring the choke manifold is properly lined up for the current operation.
· Carry out derrick inspections and Dropped Object Checks thoroughly and timely, document the results and ensure any anomalies are reported and rectified.
· Responsible for ensuring good housekeeping in all the drilling areas.
· Complete sections of Daily Drilling Reports as directed by the Driller.
· Calculate and record drilling line ton miles. Complete casing check lists.
· Maintain an accurate pipe tally.
· Maintain an accurate and complete record of all equipment which enters the well.
· Update the pre-kick sheet. Health & Safety;
· Actively promote the STOP system and the PTW system - ensure full participation by the Drilling Crew in both.
· Ensure Drilling Operations under his supervision do not contradict Stena's H S &E Policies and Procedures.
· Responsible for participation in and commitment to Stena Drilling's Dropped Object Procedure.
· Review and update Risk Assessments with crew on a regular basis and ensure appropriate Risk Assessment is reviewed prior to the commencement of each task. Update Risk Assessments and Rig Specific Work Methods and Procedures following task completion where lessons learned can positively affect future similar operations.
· Promote Stena's 'Golden Rules' and the installation's 'House Rules'
· Ensure the Drilling Crew are familiar with and conform to the requirements of COSHH regulations.
· Must be fully committed to preventing damage to the environment.
· Ensure the Drilling Crew are familiar with and adhere to Stena's Environmental Policy. Keep the Driller informed of all matters of significance within the Drilling Department.
· Consult with the Driller and Toolpusher regarding the progress of the Drilling Operation in order to ensure effective pre-planning.
· Participate in Pre-Tour Safety Meetings.
· Attend Pre-Job Safety Meetings incorporating the relevant Risk Assessment for the specific task.
· Participate in weekly safety meetings with the Drilling Crew.
· Complete a documented shift handover in line with Stena Drilling's Handover / Reporting Procedure.
· Ensure drilling related safety alerts are communicated to drilling crews and actioned if required.
· Keep informed of the contents of the Operator's Instructions and the Drilling Programme.
· Ensure the appropriate barriers are in place and the relative announcement made on the PA system prior to the commencement of critical operations.
· Notify the Driller and Toolpusher prior to the commencement of any man riding operations.
· Inform 3rd Party Representatives prior to handling or operating their equipment.
Tintu.A.R
Email ID: tintuar2009@rediffmail.com
tintuar007@gmail.com
Ph No: 00966548772755
education
Type of Schooling/Training: Type of Degree/Certification
College Bsc in Electronics(Degree)
(2000 June-2003 July )
Training Institute: Fire and Safety Engineering
(Diploma Certification)
(2004 May- 2005 July)
Training Institute: OSHA Certification
(Occupational Safety and Health
Administration )(2009 April)
Training Institute : NASP Certification
( National Association of Safety
Professional )(2009 April)
Training Institute: JHA and PTW Certification
(2009 May)
Training Institute: Medic First Aid Certification
(2011 March)
Training Institute: REDHAT LINUX(2008 June)
Training Institute: Ms Office 2003-07(2003 dec)
work experience
Company: Saudi Diesel Equipment Co., Ltd From: To:
Position Held: HSE Coordinator 12/11/2011 Present
Brief Description of Responsibilities:
· Communicate Awareness throughout the organization of SDEC SMS in order to increase Occupational health and safety awareness at all levels within the organization
· Ensure strict compliance to company policy and procedure and those that are applicable to Occupation, Health and safety programs, communicating any potential problems or High or Medium Risk to the QA/QC H&S Country Manager
· Take prompt and timely action to prevent dangerous or near miss incidents Respond and report all incidents inclusive of employees ‘Safety Concerns’
· Assist or investigate and report on all serious/critical personal injury accidents occurring
· to staff and/or visitors to the appropriate Senior Management, and to assist in the
· investigation of all accidents/incidents that result in damage or injury to personnel and
· property of the Company
· Prepare safety programs, procedure and checklist and other supporting documentation
· Implement a co-coordinated system to manage, maintain and retrieve all hard and soft
· copy documents, records and files
· Perform SMS Job Hazard Analysis, assessments and inspections
· Attend and actively Participate in Safety Committee Meetings
· As applicable prepare and present OH&S Tool Box Talks and Presentations
· Prepare and submit monthly or as required summery SMS reports and or statistics for
· Senior Manager review
· Become fully competent in OSHAH 18001 & ISO 9001 H&S and Quality Management
· system requirements
· Achieve Internal Auditor certification in OSHAH 18001 and ISO 9001
· Participate in OSHAH 18001 and ISO 9001 Quality Audits and Assessments in
· cooperation with QA Engineer or QA/QC & H&S Country Manager
Company: ETA Star Holding Ltd, India From: To:
Position Held: Safety Officer 12/02/2006 05/10/2011
Brief Description of Responsibilities:
· Implementation and Compliance of HSE plan and procedures
· Hazard identification, risk assessment (HIRA), and ensuring implementation of control measures.
· Job Hazard analysis (JHA)
· Hazard communication and recording.
· Permit-to-work system compliance for excavation, Hot Work, confined space work Etc
· Co-Ordination of third party inspection for Cranes, Lifting accessories.
· Routine site safety inspection and reporting for improvement.
· Co-Ordination of site safety audits with Consultant / Client.
· Incident / Accident investigation and reporting.
· Rendition of periodic safety returns to Corporate HSE manager.
· Conduct of Site Staff Safety Meeting to discuss safety issues.
· Creation of HSE alertness and awareness amongst the site workforce through safety Posters, Slogans and Safety alert bulletins display at Prominent Places.
· Ensuring adequate/ required as per client’s specification medical
Telephone Mobile: +919323133650
Email: rodriguesfranciscoedwin@yahoo.com
_______________________________________________________________________________________
Consultant Drilling Supervisor (Day) well experienced with managing drilling contractor + service company personnel & with a good knowledge of Well-site Drilling Program implementation, Drilling Operations, Mud Engineering & Formation Geology, seeks a DRILLING SUPERVISOR (COMPANY MAN) assignment
STRENGTHS
· Strong leadership skills in a multi-cultural environment. Leads by example & respect
· Lays a strong emphasis on nurturing a united & dedicated wellsite team
· Highly efficient with managing drilling contractor & service company personnel
· Adept at precise & complete wellsite reporting i.e. accurate DAILY DRILLING REPORTS
· Hard-working & resulted-oriented, with a go-getter attitude
· Strong & inspirational HSE LEADERSHIP drive
EDUCATION, TRAINING & MARINE COMPETENCIES
· “Bachelors Degree in Engineering (Electrical)” - First Class Honors Degree, Goa University (Nov 1996)
· “IWCF (International Well Control Forum) Drilling Supervisor, COMBINED SURFACE & SUBSEA BOP (Blow Out Preventer) STACK” (Aug 2011)
· “Management Development Course for Drilling Superintendents & Drilling Managers”. Training program conducted by Setrac College of Offshore Training (SCOT), Navi Mumbai (Mar 2012)
· “Drilling Data Input System (DDIS)” i.e. Daily Drilling Morning Report software
· “Accident Investigation & Reporting”. Maritime training course conducted by Setrac College of Offshore Training, Navi Mumbai (Mar 2012)
· “Stuck Pipe Prevention”. Drilling training course conducted by SCOT, Navi Mumbai, (Feb 2012)
· “Horizontal & Directional Drilling”. Drilling training course conducted by SCOT, (Feb 2012)
· “ISM (International Safety Management) Course”. Maritime training course conducted by GSMS Maritime Training Institute, Mumbai (Feb 2011)
· “Ship Security Officer” i.e. SSO Course (International Ship & Port Facility Security i.e. ISPS Code). Maritime training course conducted by GSMS Maritime Training Institute, Mumbai (Feb 2011)
· “Helicopter Landing Officer” i.e. HLO Course. Maritime training program conducted by GSMS Maritime Training Institute, Mumbai (Feb 2011)
· “Anchor Handling Course”. Advanced maritime training course conducted by Setrac College of Offshore Training, Navi Mumbai
· “Towing Operations Course”. Advanced maritime training course conducted by Setrac College of Offshore Training, Navi Mumbai
· “Lead Auditor - OHSAS 18001 Occupational Health & Safety Assessment Series”. IRCA (International Register of Certified Auditors) registered program conducted by Bureau Veritas
· “Lead Auditor - EMS 14001 Environmental Management System”. IRCA (International Register of Certified Auditors) registered program conducted by Lloyd’s Register
· “Lead Auditor - ISO 9001 Quality Management System”. IRCA (International Register of Certified Auditors) registered program conducted by Moody International
· “Project Planning & Management Techniques”. Training program conducted by Emirates Education Center, Dubai
· “BOSIET (Basic Offshore Safety Induction & Emergency Training)” - Maritime training course conducted by GSMS Maritime Training Institute, Mumbai (Feb 2011)
· “Hydrogen Sulfide (H2S) Safety”. GSMS Maritime Training Institute, Mumbai (Feb 2011)
· “Helicopter Underwater Escape Training (HUET)” - Maritime training course conducted by the Naval Maritime Academy (Indian Navy) at Indian Naval Base - INS Kunjali, Mumbai
· INDOS certified Seafarer - INDOS (Indian National Database of Seafarers, Government of India) lifetime registration
· Panama CDC (i.e. Seaman Book) : Possess a valid Government of Panama CDC
· Indian CDC (i.e. Seaman Book) : Possess a valid Government of India CDC
Completed the following IMO (International Maritime Organization) modular maritime training courses (STCW 95 - Standards of Training, Certification & Watchkeeping for Seafarers, Reg. VI/1, STCW Code A, Table A-VI / 1-1 to 4)
· Personal Survival Techniques (i.e. Sea Survival)
· Fire Prevention & Fire Fighting
· First Aid
· Personal Safety & Social Responsibilities
MARITIME COMMAND & CONTROL TRAINING
Completed the following advanced Maritime Command & Control training courses conducted by Setrac College of Offshore Training, Navi Mumbai
· “OFFSHORE INSTALLATION MANAGER (OIM)” Course
· “MANAGEMENT OF MAJOR EMERGENCIES (MOME)” Course
· “OFFSHORE EMERGENCY RESPONSE TEAM LEADER (OERTL)” Course
WORK EXPERIENCE
CONSULTANT DRILLING SUPERVISOR - DAY (i.e. "Company Man") [Dec 2011 to present]
Operator - GNPOC, Sudan
· Well-site based, on a 28 days on 28 days off roster
· Manage execution of operations carried out by the rig, following the Drilling Program & according to Company & Well Engineering standards
· Ensure all well operations are conducted in accordance with the approved Drilling Program & in compliance with HSE Management System, Statutory Regulations & good oilfield practices
· Manage the well-site organisation in order to deliver wells in an efficient & cost effective manner
· Ensure the drilling contractor & service companies are fully briefed about the Drilling Program
· Provide leadership, supervision & guidance to technical staff & contractors on the rig
· Ensure accuracy of well-site reporting in the Drilling Data Input System (DDIS) software & email the DAILY DRILLING REPORTS (Daily Drilling Report, Daily Drilling Cost Report, Drilling Curve, Used Bit Inventory, Daily Mud Report, POB) to the Drilling Superintendent
· Have daily telephone meeting with Drilling Superintendent to update progress on well-site activities
· Ensure all well operations are conducted in a safe & efficient manner & in compliance with HSE Policy. Encourage & actively participate in safety systems & initiatives
· Co-ordinate rig site response to incidents & accidents. Responsible for doing a first-line investigation & reporting of all incidents & accidents on the location
· Manage logistics of drilling operations in an efficient manner by ensuring service personnel are requested & arrive at the rig in a timely manner & that they depart the rig on completion of their work scope & also by ensuring that materials & rental equipment arrive at the rig in a timely manner & that rental equipment is discharged from the rig promptly when no longer required
· Ensure all tools & drill string components are right are fit for purpose & compatible with the well & other components to minimize rig downtime & optimize drilling performance
· Identify areas of inefficiency & bring to attention of relevant contractor & the Drilling Superintendent
· Initiate / participate in safety meetings
· Supervise critical operations & ensure potential problems are identified & contingency plans in place
· Monitor Well costs & AUTHORITY FOR EXPENDITURE (AFE). Ensure all drilling operations are conducted within budget & schedule through efficient planning & management of resources
· Prepare "Well-End Summary" at the end of each well
WELL PLANNER [Jan 2009 to Nov 2011]
DEEPWATER, Water Depth - 1400 meters (4600 feet). “FDPSO Azurite” (“FDPSO” = “Floating DRILLING Production Storage & Offloading” Vessel, i.e. Producing DRILLSHIP)
Prosafe Production Services Limited, Congo - Singapore - India, (Operator - Murphy Oil)
· Was based offshore at well-site, onboard “Azurite” in Congo deepwaters (on a 28 / 28 days roster)
· Planned & co-ordinated daily activities on rig towards effective implementation of the Drilling Program
· Closely monitored drilling & related services work of contractors, for adherence to scheduled deadlines & in accordance with the Drilling Program
· Assisted the Drilling Supervisor in compiling the DAILY DRILLING REPORTS
· Monitored Well costs & AUTHORITY FOR EXPENDITURE (AFE). Ensured all drilling operations were conducted within budget & schedule through efficient planning & management of resources
· Monitored Drilling Curves, Used Bit Inventory & POB
· Co-ordinated with shore office to facilitate logistics of crew, equipment, helicopters & supply boats
· Provided logistical & schedule management to Drilling operations & planned manning levels
· Planned, reviewed & directed material, equipment & services required for the Drilling Program & followed up to ensure adequate & timely supply
· Monitored progress & updated various Operations Plans including Wells Subsea Construction Plan & Drilling Schedule
· Ensured safety had the highest priority & was at the forefront of well planning & execution
· Planned advancement of Congolese National staff & ensured a “Training Matrix” & “Succession Plan” was in place for all key skills to deliver technical competence & personal development
ASSISTANT DRILLER [Jan 2008 to Dec 2008]
Offshore, onboard SEMI-SUBMERSIBLE Drilling Rig “Energy Driller”. Water Depth - 1000 ft
Jet Drilling (S) Pte. Limited, Singapore, (Operator - ONGC)
· Was based onboard Rig “Energy Driller” (on a 28 / 28 days roster)
· Assisted in rig upgrade & maintenance works carried out on Semi-Submersible Drilling Rig “Energy Driller” at ST Marine Shipyard, Singapore in preparation for a 3 year drilling contract offshore India
· Aided marine department in installation of ballast water pumps, down in the ballast columns
· Conducted “Pre-Tour Safety Meeting”
· Aided in installation of Motion Compensator for trial
· Attended JSA & RHA Meetings prior to commencement of hazardous operations
· Advocated a proactive approach to Safety
CONTRACTS ADMINISTRATOR [Dec 2002 - Dec 2007]
APS Dubai Limited, Dubai : A multinational company providing maintenance engineering services to OFFSHORE Oil Production & Drilling Facilities
· Provided adequate resources for optimized management of offshore engineering contracts
· Interacted with clients & monitored works progress to meet contractual requirements
· Co-ordinated logistics of offshore crew, equipment & material
ASSISTANT CO-ORDINATOR [Apr 2000 - Nov 2002]
International Inspection Services Limited, (Lamprell JACK-UP RIG CONSTRUCTION YARD), Sharjah : Inspection division of the “Lamprell Energy” group - an Offshore Engineering group with expertise in Jack-up Drilling Rigs - new build construction, upgrade & refurbishment
· Based in Lamprell Jack-up Rig Construction Yard at Port Khalid (Sharjah Seaport) & rdinated operations of the Inspection Division which included Non Destructive Testing (NDT), PWHT, Welding Inspection, QA/QC, etc., carried out onboard Jack-up Drilling Rigs
· Co-ordinated work schedules of crews
PROJECT PLANNING ENGINEER [Nov 1996 - Mar 2000]
Goa Handling Controls (P) Limited, Goa : A large engineering company providing heavy fabrication & maintenance services to Oil, Petrochemical, OFFSHORE Petroleum industries & to Naval vessels
· Prepared projects activity plans in consultation with Projects Manager
· Interacted with core technical teams to expedite execution of projects activities to planned schedules
ZORAN RAJIC
Tel:+38523393035; Mob.+385981643778
e-mail: zoran.rajic1@gmail.com
PERSONAL STATEMENT OF OBJECTIVE:
I am ambitious, hard working individual with many years diverse experience in my chosen profession already. I wish to further invest myself in Catering Services where my international experience and my professional and human qualities will be an incontestable asset for a dynamic and ambitious company. I have a wealth of experience in differing roles including Chief, Onshore & Offshore Camp Boss, over 20 years.
EDUCATION AND TRAINING:
CATERING COOK III DGREE CERTIFICATE, Cert.No.01-III-126/84 issued in Sarajevo on 10/06/1986
FAMILIARIZATION TRAINING , STCW regulation VI/1, issued in 17/02/2000
BAISIC TRAINING, STCW regulation VI/1,issued in 24/12/2001
MEDICAL FIRST AID, STCW regulation VI/4. issued in 22/12/2004
ADVANCED MEDICAL AIDER, RGIT Aberdeen,issued 2012
OPITO, RGIT Aberdeen,issued 2008
CBT COURSE, Seagull AS.(ID 9569),issued in 2005
BOSIET, RGIT Aberdeen, issued 2012
MIST, RGIT Aberden,issued 2012
HUET, RGIT Aberdeen ,issued 2012
BASIC FOOD HYGIENE, Vroon in-house training, issued 2009
OGUK OFFSHORE MEDICAL CERTIFICATE, Aberdeen, issued 2012
OPERATIONAL OFFSHORE EXPERIENCE:
10.04.2008: VROON OFFSHORE - ERRV- COOK - AMA (Present)
13/06/2006: FRATELLI COSULICH SPA - (FPSO, ONSHORE CAMP, BARGE) - CHIEF COOK, CAMP BOSS
27/10/2004: OSM NORWAY - AHTS - CHIEF COOK
22/06/2001: BOA OFFSHORE NORWAY – AHTS - CHIEF COOK
SKILLS: Proven ability to relate and communicate with people of all nationalities and backgrounds. Adept at ensuring day-to-day efficient running of large multinational contracts.
Excellent organisational skills – personnel, transportation, maintenance, equipment, supplies, etc.
Have the ability and experience to prepare quality variety dishes in the stipulated time.
Have expertise in variety of techniques in cooking to prepare healthy tasty dishes.
Shazly Fawzey Saleem Shahat
Email: man.shazly@yahoo.com
Tel: 002-096-5472533 & 01093942435 & 01112378603
Floor Man
The Position
Language Skills
Language : English ( Good )
Educational Skills
Qualification : Diplome Of Industrial School
Experience Land Rig & Offshore Rig
Seq.
Company
Position
Form
To
1
Egyptian Chinese Drilling
Floor Man
18/10/2009
Till Now
Training Course
1- Course Fire fighting And Fir Preventation.
2- Course FIRST Aid.
3- Course H2S.
DILAWAR ABBAS
APPLIED FOR ASSISTANT DRILLER
Email: sahilg110@gmail.com
Mob: +92-331-5458602
+92-345-5329530
TECHNICAL COURSE:
INTERNATIONAL PETROLEUM CERTIFICATE DRILLER LEVEL FROM IPC
Certificate No: D 64586 / PK 550 / 0998
Expiry: January 04th, 2014
WORKED EXPERIENCE IN DRILLING FIELD:
From to position Company Location
May 2009 till date Assistant Driller CCDC (CNPC) Pakistan
Jan 2007 May 2009 Derrick Man GWDC (CNPC) Pakistan
Feb 2005 Jan 2007 Floor Man GWDC (CNPC) Pakistan
Jan 2004 Jan 2005 Roustabout OGDCL Pakistan
RIGS TYPES
I have experience in both type of rig ELECTRICAL and MECHANICAL rig. And also worked
with Kelly and Top Drive System (TDS),( and now I am working Joy Stick Brake .)
EQUIPMENT WORKED WITH:
1 Varco Compact Racker (Pipe Stand Racker Arm)
2 ST-80 Iron Roughneck 80,000 ft/ Ibs up to 8 ½” OD.
3 CRT Casing Running Tool
4 Stand Hand II, for making DP Stand
5 NOV TDS-8SA 1150HP, 270RPM, 62, 500 ft/Ibs Drilling Torque.
TDS
1 National Oil well Varco TDS 8SA: AC Powered with PH-100 Pipe handler
2 Varco IISA AC Powered, Varco TDS 4H
MUD PUMP
1 National 10-P-130,
2 Bomco F-1600
DRAW WORKS
1 National 1320 UE 2000
2 Bomco 15 to 2000 HP
3 Hydraulic Disk Brake.
4 EDR System.
LANGUAGES:
English, Urdu,
SAFETY TRAINING:
1 H2S
2 Fire fighting
3 Environment
4 Stepping, Handling & Lifting
5 Rigging & Slinging
6 First Aid
7 Electrical
8 Crane Operations
9 Work at Height
10 Permit to Work.
MY JOB RESPONSIBILITIES AND TASKS
· Control all operations performed under his supervision ensuring they are carried out in a safe and efficient manner.
· Responsible for ensuring the Floormen and Derrickman are correctly deployed for ongoing and upcoming operations, and that they are familiar with the equipment in use and its safe operation.
· Execute instructions from the Driller and Toolpusher.
· Ensure the drilling operation is carried out as defined in the approved Operator's Instructions and Drilling Programme, and the operation is executed in accordance with Stena's Drilling Operation Manual and RSWMs.
· Responsible for ensuring the Drilling Crew perform Planned Maintenance on drilling equipment thoroughly and timely, and that it is recorded on the PM sheets.
· Carry out daily checks to include ensuring the choke manifold is properly lined up for the current operation.
· Carry out derrick inspections and Dropped Object Checks thoroughly and timely, document the results and ensure any anomalies are reported and rectified.
· Responsible for ensuring good housekeeping in all the drilling areas.
· Complete sections of Daily Drilling Reports as directed by the Driller.
· Calculate and record drilling line ton miles. Complete casing check lists.
· Maintain an accurate pipe tally.
· Maintain an accurate and complete record of all equipment which enters the well.
· Update the pre-kick sheet. Health & Safety;
· Actively promote the STOP system and the PTW system - ensure full participation by the Drilling Crew in both.
· Ensure Drilling Operations under his supervision do not contradict Stena's H S &E Policies and Procedures.
· Responsible for participation in and commitment to Stena Drilling's Dropped Object Procedure.
· Review and update Risk Assessments with crew on a regular basis and ensure appropriate Risk Assessment is reviewed prior to the commencement of each task. Update Risk Assessments and Rig Specific Work Methods and Procedures following task completion where lessons learned can positively affect future similar operations.
· Promote Stena's 'Golden Rules' and the installation's 'House Rules'
· Ensure the Drilling Crew are familiar with and conform to the requirements of COSHH regulations.
· Must be fully committed to preventing damage to the environment.
· Ensure the Drilling Crew are familiar with and adhere to Stena's Environmental Policy. Keep the Driller informed of all matters of significance within the Drilling Department.
· Consult with the Driller and Toolpusher regarding the progress of the Drilling Operation in order to ensure effective pre-planning.
· Participate in Pre-Tour Safety Meetings.
· Attend Pre-Job Safety Meetings incorporating the relevant Risk Assessment for the specific task.
· Participate in weekly safety meetings with the Drilling Crew.
· Complete a documented shift handover in line with Stena Drilling's Handover / Reporting Procedure.
· Ensure drilling related safety alerts are communicated to drilling crews and actioned if required.
· Keep informed of the contents of the Operator's Instructions and the Drilling Programme.
· Ensure the appropriate barriers are in place and the relative announcement made on the PA system prior to the commencement of critical operations.
· Notify the Driller and Toolpusher prior to the commencement of any man riding operations.
· Inform 3rd Party Representatives prior to handling or operating their equipment.
Tintu.A.R
Email ID: tintuar2009@rediffmail.com
tintuar007@gmail.com
Ph No: 00966548772755
education
Type of Schooling/Training: Type of Degree/Certification
College Bsc in Electronics(Degree)
(2000 June-2003 July )
Training Institute: Fire and Safety Engineering
(Diploma Certification)
(2004 May- 2005 July)
Training Institute: OSHA Certification
(Occupational Safety and Health
Administration )(2009 April)
Training Institute : NASP Certification
( National Association of Safety
Professional )(2009 April)
Training Institute: JHA and PTW Certification
(2009 May)
Training Institute: Medic First Aid Certification
(2011 March)
Training Institute: REDHAT LINUX(2008 June)
Training Institute: Ms Office 2003-07(2003 dec)
work experience
Company: Saudi Diesel Equipment Co., Ltd From: To:
Position Held: HSE Coordinator 12/11/2011 Present
Brief Description of Responsibilities:
· Communicate Awareness throughout the organization of SDEC SMS in order to increase Occupational health and safety awareness at all levels within the organization
· Ensure strict compliance to company policy and procedure and those that are applicable to Occupation, Health and safety programs, communicating any potential problems or High or Medium Risk to the QA/QC H&S Country Manager
· Take prompt and timely action to prevent dangerous or near miss incidents Respond and report all incidents inclusive of employees ‘Safety Concerns’
· Assist or investigate and report on all serious/critical personal injury accidents occurring
· to staff and/or visitors to the appropriate Senior Management, and to assist in the
· investigation of all accidents/incidents that result in damage or injury to personnel and
· property of the Company
· Prepare safety programs, procedure and checklist and other supporting documentation
· Implement a co-coordinated system to manage, maintain and retrieve all hard and soft
· copy documents, records and files
· Perform SMS Job Hazard Analysis, assessments and inspections
· Attend and actively Participate in Safety Committee Meetings
· As applicable prepare and present OH&S Tool Box Talks and Presentations
· Prepare and submit monthly or as required summery SMS reports and or statistics for
· Senior Manager review
· Become fully competent in OSHAH 18001 & ISO 9001 H&S and Quality Management
· system requirements
· Achieve Internal Auditor certification in OSHAH 18001 and ISO 9001
· Participate in OSHAH 18001 and ISO 9001 Quality Audits and Assessments in
· cooperation with QA Engineer or QA/QC & H&S Country Manager
Company: ETA Star Holding Ltd, India From: To:
Position Held: Safety Officer 12/02/2006 05/10/2011
Brief Description of Responsibilities:
· Implementation and Compliance of HSE plan and procedures
· Hazard identification, risk assessment (HIRA), and ensuring implementation of control measures.
· Job Hazard analysis (JHA)
· Hazard communication and recording.
· Permit-to-work system compliance for excavation, Hot Work, confined space work Etc
· Co-Ordination of third party inspection for Cranes, Lifting accessories.
· Routine site safety inspection and reporting for improvement.
· Co-Ordination of site safety audits with Consultant / Client.
· Incident / Accident investigation and reporting.
· Rendition of periodic safety returns to Corporate HSE manager.
· Conduct of Site Staff Safety Meeting to discuss safety issues.
· Creation of HSE alertness and awareness amongst the site workforce through safety Posters, Slogans and Safety alert bulletins display at Prominent Places.
· Ensuring adequate/ required as per client’s specification medical
Jasal Harpreet Singh
JASAL HARPREET SINGH
E-mail id : harpreetjasal1818@yahoo.co.in
Telephone ☎ :
9737097063
Education
- HSC PASSED IN THE YEAR 2002.
- I.T.I.PASSED (Mechanic Diesel) from 2003 to 2004
ADDITIONAL QUALIFICATION
Ø Has successfully completed Well cap course- a full course in WELL CONTROL INSTRUCTION at an Institution Accredited by The International Association of Drilling Contractors(IADC), Certificate no:A343256.
Ø As gone and successful achieved certificates in various safety courses conducted by RDC. H2S, breathing apparatus awareness, Basic first aid & CPR, Basic sea survival, Basic fire fighting.
Ø Had also successfully completed MVT Training carried out by O.N.G.C
Experience :
- Presently working with ROWAN DRILLING COMPANY (RDC) as a floor man since june 2008-to1 feb 2012, based at DOHA, (QATAR).
- Worked with Akash Exploration services Pvt. Ltd as floor man from Oct 2007-Jun 08
- Worked with Deep Industries Ltd as floor man 13/5/06 to 27/9/07.
- Have worked with Asian Oil Field Ltd, as Roustabout from 07/02/2005-01/09/2005
Positive Aspects
- I can adjust myself to any adverse situation.
- Team worker.
- Dedicated, focused and a good listener.
- My philosophy of life is: Be Prepared.
Home
About Us
Oil Rigs
Resumes
Rig Fleet
Rig Types
Oil Maps
Desert Rigs
Oilfield Jobs
Jobs Offered
Drilling Ships
Made in USA
Oil Exploration
Contract Drilling
Oilfield Services
American Greats
American Heroes
Global Marketing
Overseas Markets
Oil & Gas Equipment
Manufacturers
Heavy Duty Oil Field
Trucks
Geological & Geophysical
and Dry Hole Money
Oil Drilling Industry
Membership Associations
Government Oil & Gas Projects
International Oil Exploration
International Oil Production
Fox Drilling International
International Drilling
Charitable Projects
Top Job Applicants
Job Opportunities
Global Oil News
Oil Investment
Photo Gallery
Resources
Favorites
Comments
Contact Us
Sitemap
Links
Jobs
Oil Tankers
Oil & Gas Blog
Oil & Gas Maps
Oil & Gas Funds
Arabian Oil & Gas
Oil & Gas Exploration and
Production Resources
Oil & Gas Resource Links
America's #1
Oil & Gas Resources Guide!
Oil Industry References
Bloomberg Businessweek
Tribute to Oil Workers
Daily News and Views
Military Support
Rig Construction
More Resumes
Customers
Rig Fleet
Post Your Resume
Related Companies
Introduce Your Company
How to benefit from low natural gas prices
Gasoline Prices
Resumes One
Resumes Two
Energy Technology Resources
